Facilities across Kern County replace uninterruptible power supply systems for a variety of reasons that have nothing to do with the equipment being worn out or unusable. Oilfield support operations, food and beverage processing plants, agricultural cold storage facilities, hospitals, municipal buildings and the growing base of logistics and light-industrial buildings around Bakersfield all depend on UPS protection to keep critical loads running through utility disturbances. When that protection is replaced during an electrical upgrade, becomes surplus after a consolidation, or is removed as part of a facility shutdown, the equipment can still hold real value in the secondary market. USA Decom provides equipment acquisition services to facility owners, electrical contractors, data center operators and equipment resellers in the Bakersfield area, evaluating used UPS systems, battery strings and related power protection infrastructure for possible purchase, removal and responsible disposition.
If your facility has a UPS system, battery cabinet or associated power equipment coming out of service, our team can review the nameplate details and project conditions to determine whether the equipment is a good candidate for acquisition, resale or recycling. This page covers what we look for, how the evaluation process typically works, and what information helps us respond with a useful answer.
Why Bakersfield Facilities End Up With Surplus UPS Equipment
Kern County’s economy is built around a mix of energy production, agriculture, food processing and an expanding logistics and distribution presence along the Highway 99 and Interstate 5 corridors. Many of these operations run three-phase UPS systems to protect control rooms, SCADA systems, process controls, refrigeration monitoring, telecommunications gear and IT infrastructure. As facilities modernize their electrical systems, consolidate operations or transition to newer double-conversion or modular UPS platforms, the equipment they replace often still functions well even though it no longer meets the site’s current capacity or redundancy requirements.
If you have a project coming up, use the form below to tell our team about the facility, equipment and schedule.
Surplus UPS equipment also comes out of service for reasons unrelated to age or failure. A facility relocating production, exiting a leased building, downsizing a server room or repurposing a building for a new tenant may simply no longer need the power protection capacity that was originally installed. In these situations, the UPS and its battery plant are often in serviceable condition and worth evaluating before being scrapped outright.
UPS Systems and Manufacturers We Evaluate
Our team regularly evaluates three-phase UPS systems from the manufacturers most commonly installed in commercial, industrial and data center environments. That includes Eaton’s 9395 UPS family and related Power Xpert 9395, 9395P and 9395XC platforms, as well as Eaton’s 93PM, 93E and 9355 lines and the modular BladeUPS system. We also look at Vertiv and legacy Liebert systems, including the Liebert EXL, EXL S1, eXM, APM and NXL lines. Larger EXL-series frames are built as scalable, multi-module systems, and many current-generation frames are designed to support lithium-ion battery strings in addition to traditional VRLA configurations, which is worth noting when evaluating a facility that has recently transitioned away from lead-acid batteries.
Beyond Eaton and Vertiv/Liebert, we evaluate APC and Schneider Electric Galaxy-series UPS systems, including Galaxy VX, VM, VS and VL platforms along with legacy Galaxy 5000, 5500 and 7000 models, plus Symmetra PX and Symmetra MW frames. MGE Galaxy and Comet systems still appear at older industrial and commercial sites and are evaluated the same way. Mitsubishi 9900 and 9800 series units and Toshiba 4000-series and G9000-series industrial UPS systems come up regularly in facility surveys, particularly at manufacturing and process facilities that installed heavier three-phase protection decades ago and have kept it running well past its original design life. We also recognize equipment from Powerware, Chloride, GE, Emerson, Piller, Active Power and Riello when it appears in a facility inventory.
UPS capacity is generally discussed in kVA, and we evaluate systems across the range commonly found in commercial and light-industrial applications, from smaller 20-50 kVA single-module units up through 500-1,200 kVA multi-module systems more typical of data centers, hospitals and larger industrial control environments. Larger multi-module and paralleled systems require more detailed evaluation of module count, bypass configuration and cabinet footprint, but they can also represent a more significant recovery opportunity given their size and the value of individual power modules.

Battery Plants and Energy Storage Systems
The battery plant supporting a UPS is often as important to evaluate as the UPS module itself. VRLA (valve-regulated lead-acid) battery strings remain the most common configuration in Kern County facilities, typically arranged in cabinets or on open racks depending on the age of the installation and available floor space. We also evaluate wet-cell battery systems still found at some older industrial and utility-adjacent sites, along with the lithium-ion battery cabinets that have become more common in recent UPS retrofits and replacements. Flywheel-based energy storage systems, while less common, occasionally appear in critical-power evaluations and are assessed on a case-by-case basis.
Battery condition, age and chemistry materially affect what happens to a battery plant during a project. A string of VRLA batteries nearing the end of its service life may have limited resale value as functioning batteries but still carries recoverable lead and plastic content through proper recycling channels. Lithium-ion battery cabinets require different handling, transportation and disposition procedures than lead-acid systems, and those requirements should be identified early in project planning rather than discovered during removal. When you submit information about a UPS system for evaluation, including details about the associated battery plant, whether it is VRLA, wet-cell or lithium-ion, along with approximate string count, age and general condition, it helps our team give you a more complete picture of what to expect.
What Affects the Value and Recoverability of a UPS System
Several factors influence whether a used UPS system is a better candidate for resale versus recycling, and we walk through these with every facility we evaluate. Manufacturer and model matter because certain platforms, particularly Eaton 9395-series and Liebert EXL-series systems, remain widely deployed and supported in the secondary market, which keeps demand for functioning units and spare modules relatively strong. Capacity matters as well; mid-size and large three-phase systems generally offer more recovery potential than small single-phase units, simply because of the value of the internal components and the demand for that capacity range among data center and industrial buyers.
Operating condition and maintenance history also play a significant role. A UPS that was on a regular preventive maintenance contract and shows no history of major faults is generally more attractive to secondary buyers than one that has been running past its recommended service intervals or shows signs of internal component failure. Completeness matters too. Systems missing bypass cabinets, distribution modules or battery strings are still worth evaluating, but the missing components affect how the equipment can be used or resold. Accessibility and removal logistics also factor into any evaluation. A UPS located on an accessible ground floor with a clear path to a loading area is generally more straightforward to remove than one located in a basement mechanical room, an upper-floor electrical closet or a space with limited rigging clearance.
Planning the Removal: Disconnection, Rigging and Site Access
Even when a UPS system has clear resale value, getting it out of the building safely requires the same planning discipline as any decommissioning project. Before any equipment moves, the system needs to be properly de-energized and isolated from the facility’s electrical distribution, coordinated with the facility’s electricians or engineering staff so that upstream breakers, automatic transfer switches and bypass paths are handled correctly. Larger three-phase UPS cabinets and battery racks are heavy, often requiring pallet jacks, hand trucks, dollies or overhead rigging depending on cabinet weight and the building’s floor loading and doorway clearances.
Facilities with UPS systems located in below-grade rooms, tight mechanical spaces or upper floors without freight elevator access present logistics challenges that should be identified before a removal date is scheduled. We also account for whether the facility remains operational during removal. Many UPS replacement projects involve removal work happening while the rest of the building stays occupied, which means the sequencing has to account for active operations, adjacent electrical rooms and any ongoing production or IT activity nearby. Providing photographs of the equipment, the surrounding room and the path out of the building helps our team plan an accurate scope before a site visit is scheduled.

Real Projects, Real Results: Evaluating a Facility UPS Replacement
A useful example reflects a project type our team has handled for facility operators across the Central Valley: a building upgrades an aging three-phase UPS system as part of a broader electrical infrastructure improvement, leaving the original unit and its associated battery cabinets in place and needing disposition. Our process on projects like this typically starts with photographs of the UPS nameplate, the battery cabinets and the surrounding electrical room, along with basic details about age, known operating condition and any maintenance history the facility can share. From there, we evaluate the manufacturer and model against secondary-market demand, assess the battery plant separately from the UPS module itself, and provide the facility with an evaluation of the equipment along with a proposed removal approach that accounts for the room’s access conditions and the facility’s operating schedule. On projects involving multiple UPS units or a mix of functioning and non-functioning equipment, we typically separate the inventory into what can be resold, what should be recycled for material recovery, and what requires specialized handling due to battery chemistry or component condition.
Serving Bakersfield and the Surrounding Kern County Market
USA Decom provides UPS and battery equipment acquisition services throughout Bakersfield and the surrounding Kern County market, including Delano, Wasco, Shafter, Arvin, Tehachapi and McFarland along the Highway 99 industrial corridor connecting Bakersfield to the greater Central Valley. We also work with facilities further out in the region toward Visalia and the broader San Joaquin Valley when a project’s scope or logistics make sense for our team to handle. Whether your facility is an oilfield support operation, a food or beverage processing plant, a distribution center, a hospital or municipal building, or a commercial office replacing its power protection infrastructure, our evaluation approach stays the same: understand the equipment, understand the site, and provide a clear answer about what can be purchased, removed and responsibly recycled.
Tell Us About Your UPS Equipment
If you have a used UPS system, battery cabinet or related power protection equipment coming out of service in Bakersfield or anywhere in Kern County, use the form below to tell our team about it. Include the manufacturer, model and approximate kVA capacity where known, the age and condition of the unit, whether battery strings are VRLA, wet-cell or lithium-ion, the quantity of units involved, the equipment’s location and accessibility within the facility, your target removal timing, and photographs if you’re able to share them. That information lets our team evaluate the opportunity and respond with next steps for your specific project.


