A modular or containerized data center doesn’t retire the way a traditional data hall does. The IT load, power infrastructure, cooling plant and enclosure are often engineered as a single integrated unit, which means decommissioning has to be planned around the module itself rather than around a building. Whether you’re clearing a shipping-container-style POD from a logistics campus near the Port of Long Beach, retiring a skid-mounted power module from an edge deployment, or preparing a prefabricated data center pod for relocation to another site, the removal sequence, rigging plan and disposition strategy all look different from conventional facility decommissioning.
USA Decom provides removal, decommissioning and disposition services for modular data center systems in Long Beach and the broader Los Angeles and Orange County industrial corridor. This includes standalone containerized IT modules, modular power and cooling rooms, and full prefabricated data center pods built by manufacturers such as Vertiv, Schneider Electric/APC, HPE, Dell and BladeRoom, along with the generators, UPS systems, switchgear and precision cooling equipment integrated inside them.
Why Modular Data Center Removal Is Different From Standard Decommissioning
A conventional data center decommissioning project deals with a fixed building shell: racks, cabling, PDUs and cooling equipment are removed from a static structure that stays in place. Modular data centers reverse that relationship. The enclosure — whether it’s a 20-foot or 40-foot ISO-style module, a factory-assembled power skid, or a purpose-built pod like an HP EcoPOD or Vertiv SmartMod — is itself an asset that has to be disconnected, drained, de-energized, rigged and transported, in addition to whatever is inside it.
That changes several things about how a project gets scoped:
- The module’s structural design, weight and rigging points determine how it can be lifted, loaded and moved, not just how the equipment inside is accessed.
- Integrated power and cooling systems are often pre-wired and pre-piped in ways that require careful isolation before the module can be safely disconnected from utility feeds, generator paralleling gear or condenser water loops.
If you have a project coming up, use the form below to tell our team about the facility, equipment and schedule.
- Disposition decisions have to be made about the module itself — resale, relocation and reuse, recycling of the structural shell, or demolition — separately from decisions about the equipment mounted inside it.
- Site access at many modular deployments (rooftop installations, side yards, logistics campuses, telecom equipment pads) is tighter than a typical loading dock, which affects crane selection and rigging sequence.
Modular and Containerized Systems We Work With
Modular data center infrastructure spans a wide range of configurations, and the removal approach depends heavily on which type is involved:
- Containerized IT modules – shipping-container-style enclosures such as HP POD (20c/40c) and HP EcoPOD 240a units, which fit dozens of standard IT racks into a single self-contained module.
- Modular power and cooling rooms – prefabricated electrical and mechanical skids, including Vertiv SmartMod, SmartRow and SmartAisle platforms designed for rapid deployment of IT capacity in defined kW increments.
- Prefabricated pod and building-block systems – factory-built modules from manufacturers like BladeRoom and BASELAYER that are assembled on site from standardized sections rather than shipped as a single sealed box.
- Integrated mechanical infrastructure – cooling skids and CRAC/CRAH packages from providers such as Silent-Aire, STULZ, Liebert and Uniflair that are mounted within or adjacent to the module.
- Electrical and standby power equipment – generators (CAT, Cummins, Kohler), UPS systems (Eaton, Liebert, APC/Schneider Electric) and switchgear (Square D, Eaton, Siemens, GE) that are frequently integrated directly into the modular power train.
Projects can range from a single 250 kW edge module supporting a distribution or logistics facility to a 1 MW–2 MW modular deployment, up through multi-megawatt modular power plants supporting a larger campus. The removal plan should reflect the actual scale and configuration of what’s on site rather than a generic checklist.
Planning the Project: What Affects Scope, Cost and Schedule
Before any disconnection or rigging work begins, a few project variables need to be established:
Operational status. Is the module still live, in standby mode, or already shut down? Live or standby modules require coordinated de-energization, fuel and coolant draindown, and confirmation that upstream and downstream systems (utility feeds, backup generation, building automation) are properly isolated before physical work starts.
Module type and construction. A steel ISO-frame container, a factory-built BladeRoom-style panelized module, and a skid-mounted power room each rig and load differently. Knowing the manufacturer, model family and approximate dimensions and weight in advance lets our team select the right crane, rigging hardware and transport method.
Site access and clearances. Modular deployments often sit in constrained locations — rooftop pads, side yards adjacent to active operations, fenced equipment compounds, or industrial parcels near the ports where truck and crane staging has to work around active logistics traffic. Overhead clearances, ground bearing capacity, and lay-down space for a mobile crane all factor into the lift plan.
Disposition goal. Is the module being scrapped, or does the owner want it relocated and reinstalled elsewhere, sold intact to a secondary buyer, or broken down so the equipment inside can be resold separately? This decision drives whether the module is removed as a complete unit or dismantled in place.
Data handling. Data-bearing devices removed from IT modules may require appropriate sanitization, destruction or chain-of-custody procedures as part of the overall project plan, coordinated with the equipment owner’s IT and security requirements.

Asset Recovery: Getting the Most Out of a Retiring Module
Modular data center equipment is often younger, better maintained and more standardized than equipment removed from an aging conventional facility, which can create meaningful recovery opportunities if the disposition plan is set up correctly from the start.
The module enclosure itself. A structurally sound container or skid-based module may have resale or reuse value independent of what’s inside it, particularly if it can be removed intact rather than cut apart. Whether relocation and resale is realistic depends on the module’s condition, age, manufacturer, and how it was originally installed.
Standby power equipment. Generators integrated into modular power rooms — commonly CAT, Cummins or Kohler units in the hundreds-of-kW to low-MW range — are frequently among the highest-value components in a modular deployment, especially when documentation, service history and operating hours are available.
UPS and battery systems. Eaton, Liebert and APC/Schneider Electric UPS modules, along with associated battery cabinets, can retain secondary-market value depending on chemistry, age and configuration.
Precision cooling equipment. CRAC, CRAH and skid-mounted cooling units from Liebert, STULZ, Uniflair or Silent-Aire may be candidates for resale or reuse in another deployment if removed without unnecessary damage.
Electrical distribution gear. Switchgear, PDUs and breakers from manufacturers like Square D, Eaton, Siemens and GE are evaluated for resale, reuse or recycling based on condition, capacity and completeness.
Structural and commodity materials. Steel framing, copper wiring, aluminum busway and other structural components that don’t have equipment resale value are typically segregated for recycling rather than sent to landfill as mixed demolition debris.
Recoverable equipment and material value can offset a portion of the overall removal cost, though the extent of that offset depends on the specific equipment, its condition and current secondary-market demand. Identifying recovery opportunities early — before a module is cut apart or equipment is damaged during removal — generally preserves more value than deciding on disposition after the fact.
Removal Sequence: From Disconnection to Loadout
A typical modular data center removal project follows a sequence broadly similar to this, adjusted for the specific module type and site conditions:
- Site assessment and scope development — confirming module type, manufacturer, dimensions, weight, integrated equipment, and access conditions.
- De-energization and isolation — coordinating electrical disconnection, fuel and coolant draindown, and confirmation that the module is safely isolated from utility and backup power sources.
- Interior equipment removal — extracting racks, PDUs, UPS units, batteries and cooling equipment from inside the module where the disposition plan calls for separate handling.
- Rigging and lift planning — selecting crane capacity, rigging hardware and lift points appropriate to the module’s actual construction and weight.
- Loadout and transportation — moving the module or its components to a laydown yard, secondary buyer, recycling facility or new deployment site, coordinated around site access and any active-facility constraints.
- Site restoration — addressing the concrete pad, structural supports, conduit and utility connections left behind once the module is gone, to the condition required for turnover.
Working Around Active Facilities and Port-Adjacent Sites
Long Beach’s industrial base includes logistics, distribution and light-industrial facilities operating alongside the Port of Long Beach and its surrounding rail and trucking infrastructure, and modular data center installations frequently support these kinds of operations — supporting warehouse automation, telecom infrastructure, or edge computing for a distribution campus. Removing a modular unit from a site like this means coordinating crane and truck staging around active dock traffic, working within whatever footprint is available on a developed industrial parcel, and scheduling isolation and lift work so it doesn’t interrupt ongoing operations. Facilities located closer to the coast should also account for the corrosive effects of salt air on outdoor electrical enclosures and structural steel when planning disconnection and handling procedures.
Example Project Details: Removing a Modular Power and IT Deployment
On a project of this type, our team typically starts by confirming the manufacturer and configuration of the module — for example, a skid-mounted power room paired with a containerized IT enclosure supporting a mid-size distribution or logistics operation. After the site walk confirms access conditions and rigging clearances, the sequence usually includes coordinating with the facility’s electrical contractor to isolate the module from utility and standby power, draining fuel and coolant systems, and removing IT and battery equipment from inside the enclosure before the structure itself is rigged for lift. Recoverable equipment — a generator, UPS units, cooling skids — is evaluated and set aside for resale or reuse, while the module shell is either prepared for relocation intact or broken down for recycling depending on the owner’s disposition goals. The pad and utility connections are then restored to the condition required for the site’s next use.
Serving Long Beach and the Surrounding Region
USA Decom provides modular data center removal, decommissioning and disposition services in Long Beach and throughout the surrounding Los Angeles and Orange County industrial markets, including Carson, Signal Hill, Compton, Torrance, Wilmington, Lakewood and the broader South Bay and Gateway Cities areas. This regional reach allows us to work with logistics operators, telecom providers and industrial property owners across the wider LA Basin who are retiring, relocating or replacing modular data center infrastructure.
Tell Us About Your Modular Data Center Project
Every modular deployment is built a little differently, so the details matter. Use the form below to tell our team about the module type and manufacturer, its approximate power capacity, the equipment installed inside it, current operational status, site access conditions, and your target schedule for removal. If you have photographs of the module, nameplate data, or as-built documentation, including those helps us evaluate the project and any equipment recovery opportunities more accurately before we discuss next steps.


