If you have a project coming up, use the form below to tell our team about the facility, equipment and schedule.
A facilities team recently inherited a data hall in a Plano office campus that had gone dark two budget cycles earlier. The racks were still populated with dead equipment, the hot-aisle containment panels were sagging, and roughly 40,000 square feet of raised access floor sat underneath a tangle of abandoned copper and fiber that nobody could confidently trace back to a working path. The property group wanted the space back — either to re-lease it as shell office space or to make room for a smaller, denser deployment — but nobody on staff had a plan for how to get from “full of dead IT infrastructure” to “clean, open floor.” That gap between an inactive white space and a usable one is exactly the kind of project USA Decom is built to handle, and it’s a scenario we see across corporate campuses, colocation suites and enterprise server rooms throughout the Plano market.
White space decommissioning is a narrower discipline than a full data center teardown. It focuses specifically on the data hall itself — the racks, the floor, the overhead infrastructure and the power and cooling components that serve the space — rather than the building’s generators, chillers, or the broader mechanical and electrical plant. For a property owner or facilities manager who needs the room cleared without triggering every subsystem in the building, that distinction matters. It shapes scope, cost and how quickly the space can be turned back over for reuse.
Why Plano Facilities Need This Service
Plano has grown into one of the more concentrated corporate and technology hubs in North Texas, anchored by large business campuses along the Legacy corridor and the surrounding office and mixed-use developments that have attracted corporate headquarters and regional operations centers over the past decade. Many of these companies built out enterprise server rooms, colocation suites or dedicated data halls to support their own IT operations. As organizations migrate workloads to the cloud, consolidate into colocation providers, or refresh their infrastructure into denser, more efficient footprints, the older white space is often left behind — fully built out but no longer in service.
At the same time, Plano’s continued role as a corporate and business hub keeps demand steady for renovated, repositionable commercial space. A building with a legacy data hall that’s been sitting idle represents both a liability and an opportunity for its owner: a liability because dormant racks, live-looking cabling and abandoned containment complicate any renovation or re-lease, and an opportunity because a properly cleared white space can support a smaller modern deployment, be converted to standard office or lab space, or be marketed to a new tenant with a clean slate.
What’s Actually Involved in Clearing a Data Hall
The core of a white space decommissioning project is everything inside the four walls of the data hall that isn’t part of the building’s primary electrical or mechanical plant. That typically includes server and network racks and cabinets from manufacturers such as APC/Schneider Electric, Chatsworth Products (CPI), Rittal, Panduit, Vertiv, Great Lakes Case & Cabinet, Eaton and Legrand — each with its own mounting hardware, cable management arms and grounding configuration that needs to be accounted for during teardown. It includes the raised access floor system itself, whether that’s a Tate, ASM, Haworth, Kingspan or older legacy panel-and-pedestal system, along with the stringers and pedestal bases beneath it. And it includes everything that ran overhead: ladder rack, cable tray and basket tray systems from suppliers like Chatsworth/CPI, Panduit, Legrand and Cablofil, plus the fiber and copper cabling itself, often from Corning, CommScope or Belden product lines, much of which has been added to, rerouted and abandoned in place across multiple IT refresh cycles.
Hot-aisle and cold-aisle containment is another major component. Whether the space uses APC/Schneider, Vertiv, Chatsworth or Subzero Engineering containment panels and doors, that structure has to be disassembled section by section, and the associated ceiling grid or rigid roof panels typically need to come down along with it. Power distribution within the white space — PDUs, remote power panels (RPPs), and overhead busway systems such as Starline or comparable products from Vertiv/Liebert, PDI, Eaton, Square D and APC/Schneider — has to be de-energized, disconnected and removed in coordination with whoever is managing electrical isolation for the space. In many projects, the CRAC or CRAH units serving the white space are included in scope as well, since they’re dedicated to that space rather than to the broader building system, and any fire suppression components tied specifically to the data hall — pre-action piping, detection heads, agent cylinders — usually need to be addressed before the space can be turned over.
Planning the Sequence Before Anyone Picks Up a Wrench
A white space clearing project runs more efficiently when the sequence is worked out before the first rack comes offline. That starts with confirming what’s actually still live. Even in a data hall that’s supposedly decommissioned, it’s common to find a handful of circuits, a forgotten switch, or a security or building-automation device still drawing power through the space. Our team typically works with the facility’s electrical contacts to verify de-energization and lockout status before any disconnection work begins.
From there, the sequence generally moves from the equipment down to the structure: IT assets and racks come out first, often with data-bearing devices set aside for whatever sanitization, destruction or chain-of-custody process the owner has established separately. Overhead cabling and cable tray typically come down next, since leaving them in place makes rack removal and floor access more difficult. Containment panels and framing follow, then PDUs, RPPs and busway, and finally the raised floor panels, pedestals and stringers. If cooling units or fire suppression components serving the space are included in the scope, those are usually coordinated toward the end, once the space around them is clear enough to work safely.
Access and logistics matter more in an occupied or partially occupied building than they do in a standalone facility. A data hall inside a Plano corporate campus or office building often means routing removed material through freight elevators, loading docks with limited hours, or corridors shared with other tenants. Scheduling disconnection and demolition work around a building’s operating hours, coordinating elevator time, and protecting finished spaces along the removal path are all part of a realistic project plan — and it’s the kind of detail that’s easy to underestimate until the crew shows up and finds out the loading dock is only accessible before 7 a.m.

Recovering Value From What Comes Out of the Space
Not everything pulled from a decommissioned data hall is scrap. Racks and cabinets in reasonable condition, raised floor panels and pedestals, containment components, copper cabling, and PDUs or busway sections can carry resale or reuse value depending on manufacturer, age, condition, completeness and current secondary-market demand. Copper cable in particular carries meaningful scrap value on its own, separate from any reuse potential. We evaluate what’s coming out of a given white space and identify what can reasonably be resold, reused or recycled rather than treating everything as a single demolition waste stream. That approach can help offset a portion of the overall project cost, though the actual recoverable value depends heavily on the specific equipment and its condition — it’s not something we promise in advance of seeing the space.
Assessing this accurately usually requires walking the space, or at minimum reviewing photographs and an equipment list, so we can see rack counts, manufacturer nameplates, floor tile condition and cabling types before finalizing a scope. Data halls of this type range from smaller server rooms with roughly 50 racks to large-format halls exceeding 900 racks across 80,000 or more square feet, and the disposition strategy looks different at each end of that range — a small server room might not justify a formal asset-recovery process, while a large-format hall often has enough recoverable material to matter to the overall project economics.
Turnover Condition and What “Cleared” Actually Means
One of the more important conversations early in a white space project is defining what “done” looks like. Some owners want the raised floor and all structural elements removed down to the slab, leaving an open shell ready for a completely different use. Others want the raised floor left in place because a future tenant may want it, with everything above it — racks, containment, cabling, overhead infrastructure — cleared out. Still others are preparing the space for a smaller, modernized deployment and only want specific zones cleared while adjacent racks stay live and undisturbed.
Getting this turnover definition right at the start avoids the more expensive version of the same conversation happening after demolition is already underway. It also affects decisions about floor patching, ceiling grid restoration, and whether any dedicated cooling or fire suppression infrastructure needs to be fully removed or simply decommissioned and left in place for a future tenant to evaluate.
Real Projects, Real Results
Coming back to the Plano data hall described earlier: a project like that generally starts with a walkthrough to document rack counts, floor condition, containment configuration and any equipment still drawing power, followed by a scope that separates IT asset handling from the physical infrastructure removal. On a project of that scale — roughly 40,000 square feet with populated racks, sagging containment and abandoned cabling — the sequence typically runs from IT equipment and cable removal, through containment and overhead infrastructure, down to the raised floor system itself, with material sorted along the way for resale, recycling or disposal. The result the property team is usually after is straightforward: an open, swept data hall with the floor either fully removed or left clean and functional, ready to hand back to leasing, renovation or a new build-out — without the abandoned infrastructure that made the space unusable in the first place.

Serving Plano and the Surrounding North Texas Market
USA Decom provides data center white space decommissioning services in Plano and throughout the surrounding Dallas–Fort Worth area, including Frisco, Allen, McKinney, Richardson, Addison, Carrollton and North Dallas. Corporate and technology campuses throughout this corridor share similar characteristics — multi-tenant or single-tenant office buildings with built-in data halls, colocation space serving regional operations, and enterprise server rooms that were built out during a company’s growth phase and now need to be repurposed as IT strategy shifts. Whether the project is a single server room or a large-format data hall, the underlying planning questions are the same: what’s still live, what needs to come out, what can be recovered, and what condition does the space need to be in when the work is finished.
Tell Us About Your Data Hall
If you’re managing a data hall in Plano or the surrounding area that needs to be cleared for renovation, re-lease or a smaller redeployment, use the form below to tell our team about the facility. Useful details include the square footage or approximate rack count, the manufacturers and condition of the racks and containment currently in place, whether the space is fully de-energized or still partially live, your target schedule, and any building access restrictions we should plan around. Photographs of the current condition help us scope the project more accurately, and they’re welcome even if the space hasn’t been walked yet. Once we have those details, we can talk through sequencing, asset recovery potential and what a realistic turnover timeline looks like for your space.
