Data Center Equipment Removal in Fresno, California

Pulling equipment out of a live or recently retired data center is a different job than clearing an office building or a warehouse. A single UPS module can weigh several thousand pounds, a rooftop CRAC unit may still hold refrigerant, and a row of server racks can represent both a cabling challenge and a meaningful source of recoverable value. USA Decom removes generators, UPS systems, precision cooling equipment, electrical gear, racks and IT hardware from data centers and data-center-adjacent facilities throughout Fresno and the surrounding San Joaquin Valley.

This is targeted equipment removal work rather than a full building teardown. The facility shell, the raised floor structure or the building lease may remain in someone else’s hands. Our job is to safely disconnect, dismantle, rig and remove the mechanical and electrical infrastructure that no longer has a use in the space, whether that means a single generator swap, a full UPS and switchgear replacement, or a room-by-room clearout ahead of a lease turnover.

Why Fresno Facilities Need Targeted Equipment Removal

Fresno sits at the center of California’s Central Valley, an area that has attracted colocation providers, telecom carriers and enterprise data operations because of its comparatively affordable land, available power infrastructure and position along the Highway 99 corridor connecting the valley’s major metro markets. As these facilities upgrade infrastructure, consolidate space or retire equipment at end of lifecycle, someone has to physically remove the retired gear.

Common triggers we see for this kind of project include:

  • A UPS or battery system reaching end of life and being replaced with newer lithium-ion or modular technology

If you have a project coming up, use the form below to tell our team about the facility, equipment and schedule.

  • A generator being swapped out for a higher-capacity unit or a different fuel configuration
  • Precision cooling units being retired as a facility shifts to a different cooling architecture
  • A tenant vacating leased data center or telecom space and needing infrastructure removed as part of turnover
  • A corporate or enterprise server room being cleared as workloads move to colocation or cloud providers
  • Electrical switchgear, PDUs or distribution equipment being replaced during a capacity upgrade

In each of these situations, the equipment itself has to come out cleanly, safely and on a schedule that doesn’t disrupt whatever operations remain in the building.

Equipment We Remove

Generators. Standby and backup generators from manufacturers such as CAT, Cummins, Kohler and Generac are common in data center and telecom environments, ranging from smaller 100-250 kW units supporting a single suite to larger 1-2 MW units supporting a full facility. Removal involves fuel system isolation, exhaust and coolant line disconnection, battery removal, and rigging the unit out of an enclosure, penthouse or rooftop location.

UPS systems and batteries. Three-phase UPS systems including Eaton 9395 and 93PM units, Vertiv/Liebert EXL, eXM and APM systems, and APC/Schneider Galaxy units are frequently found in cabinet or modular configurations ranging from roughly 200 kVA to well over 1 MW per system. These units are heavy, contain internal capacitor banks, and are almost always paired with a separate battery cabinet or VRLA/lithium battery string that requires its own disconnection and handling procedures before the unit can be moved.

Precision cooling. CRAC and CRAH units from Vertiv/Liebert, STULZ, Data Aire and Schneider/APC Uniflair are typically hard-piped into a chilled water or refrigerant loop and tied into building controls. Removal requires refrigerant recovery in accordance with applicable requirements, disconnection of piping and condensate lines, and coordination with whatever cooling system remains active elsewhere in the facility.

Electrical distribution. Switchgear, panelboards and distribution equipment from Square D/Schneider, Eaton/Cutler-Hammer, Siemens/ITE, GE/ABB and ASCO, along with automatic transfer switches and Russelectric switchgear, often require licensed electrical disconnection before rigging can begin. PDUs and RPPs from Vertiv/Liebert, PDI, Eaton/Powerware and APC/Schneider frequently sit on raised floor and require both electrical isolation and floor-cutout coordination.

Racks, cabling and IT hardware. Server racks and enclosures from APC, Chatsworth/CPI, Panduit and Rittal, along with overhead cable tray, busway systems and raised floor tile, make up the bulk of the volume in many white space removal scopes. IT hardware from manufacturers such as Dell, Dell EMC, HPE, Cisco, IBM, Lenovo, NetApp, Pure Storage, Supermicro, Arista and Juniper is generally removed separately from the mechanical and electrical infrastructure, often with its own chain-of-custody and asset-tracking requirements.

Shutdown, Isolation and Sequencing

The single most important planning step on any data center equipment removal project is sequencing the shutdown correctly. Nothing gets disconnected or rigged until the equipment has been properly isolated, and lockout/tagout procedures are established and verified before any technician touches a live circuit. On a project involving a UPS replacement, for example, load has to be transferred to a bypass path or a secondary UPS system before the retiring unit can be powered down, and battery strings need to be discharged and disconnected in a controlled sequence rather than simply unplugged.

Sequencing gets more complex when part of the facility remains operational. A colocation provider removing infrastructure from one suite while adjacent suites stay live needs a plan that keeps shared electrical and mechanical systems intact. We work with facility engineers, electrical contractors and the customer’s own operations team to build a sequence that identifies exactly which breakers, disconnects and isolation points apply to the equipment coming out, and confirms that removal work won’t create an unplanned outage elsewhere in the building.

Rigging, Access and Building Logistics

Data center mechanical and electrical equipment tends to be heavy, dense and awkward to move rather than simply large. A UPS cabinet or generator can weigh several thousand pounds concentrated in a relatively small footprint, which raises real questions about floor loading, especially on upper floors or raised access floor systems that weren’t necessarily designed for point loads from rigging equipment. Before we bring anything into a building, we look at:

  • Freight elevator dimensions and weight capacity, or whether equipment needs to move through a loading dock, roof hatch or exterior opening
  • Floor loading limits along the planned rigging path, particularly through raised floor areas or upper-story mechanical rooms
  • Corridor widths, door openings and turning radius for moving large cabinets and skids
  • Whether equipment needs to be disassembled or broken down into smaller components to clear doorways or elevators
  • Staging area availability for temporary placement before loadout
  • Coordination with building management or other tenants for after-hours or off-peak access

Rooftop generators and condensing units add another layer of planning, since a crane pick may be the only practical way to get the unit off the building, which means coordinating street closures, crane pad placement and overhead clearances in advance.

Cabling, Loadout and Transportation

Once equipment is disconnected and rigged to a staging point, the project shifts to loadout. Overhead cabling, cable tray and busway typically need to be removed section by section, particularly in white space areas where extensive copper and fiber runs sit above the racks. Raised floor tile removal and floor cutout patching are usually part of the same scope if PDUs or floor-mounted distribution were part of the pull.

For transportation, generators, UPS cabinets, switchgear and battery strings typically move by flatbed or box truck depending on size and weight, while server racks, cabling and smaller electrical components can often be consolidated into fewer loads. Battery handling deserves particular attention: VRLA and lithium-ion batteries have their own transportation classifications, and a battery string that’s been in service for years may need to be assessed for condition and packaged appropriately before it leaves the site.

Recycling and Asset Recovery

Not every piece of data center infrastructure belongs in a scrap bin. Generators, UPS systems and precision cooling units that are functional and reasonably current often have resale or reuse value in the secondary market, and recoverable value can help offset a portion of the overall removal cost. Copper cabling, aluminum bus, structural steel racking and electrical enclosures also carry scrap commodity value even when the equipment itself is beyond useful service life.

As part of scoping a removal project, we look at manufacturer, model, age, condition and completeness for major mechanical and electrical assets to determine realistic disposition paths, whether that’s resale, reuse, component recovery or recycling. We don’t promise a value for every asset submitted, but identifying recoverable equipment before it’s demolished or scrapped is part of how we approach these projects. IT hardware disposition is typically handled on a separate track, since data-bearing devices may require appropriate sanitization, destruction or chain-of-custody documentation depending on the customer’s data governance requirements.

Recent Projects: Equipment Removal in Data Center and Telecom Facilities

On projects of this type, our team has removed multi-hundred-kVA UPS systems and their associated battery cabinets, disconnected and rigged out standby generators in the 300-750 kW range, and cleared full rows of server racks and overhead cable tray from white space areas being turned back to a landlord or repurposed for a different use. A typical scope might involve isolating and removing a Liebert or Eaton UPS system and its battery string, coordinating refrigerant recovery and disconnection for a bank of CRAC units, and rigging switchgear and PDUs off a raised floor, all while a portion of the facility continued normal operations on an adjacent electrical system. These projects generally combine electrical disconnection, mechanical rigging, freight coordination and end-of-life disposition into a single managed scope rather than treating each equipment category as a separate vendor relationship.

Serving Fresno and the Central Valley

Fresno’s position along Highway 99, with connections to Highway 41 and Highway 180, puts it within a reasonable service radius of the broader Central Valley industrial and technology base. USA Decom provides data center equipment removal services in Fresno and nearby communities including Clovis, Madera, Visalia, Hanford, Merced, Tulare and the broader San Joaquin Valley region. Whether the project is a single suite inside a colocation facility, a corporate server room, or a telecom equipment room being decommissioned, the same core disciplines apply: careful isolation, safe rigging, efficient logistics and responsible disposition of what comes out.

Tell Us About Your Equipment Removal Project

If you’re planning to remove generators, UPS systems, precision cooling, switchgear, racks or other data center infrastructure from a Fresno-area facility, use the form below to tell our team about the equipment involved, the facility type, site access conditions and your target schedule. Photos of the equipment and nameplate data help us evaluate the scope and any recovery potential before we talk through next steps. The more detail you can share up front about quantity, manufacturer, model and site conditions, the faster we can put together a plan for your project.

Related Posts