CRAC Removal Services in Amarillo, Texas

Amarillo’s server rooms, telecom switch sites and small data halls don’t run on the same cooling equipment as a warehouse rooftop unit or an office HVAC system. Computer room air conditioning (CRAC) and computer room air handler (CRAH) units are precision-engineered to hold tight temperature and humidity tolerances around IT racks, and they carry their own set of removal complications when a facility closes, consolidates, relocates or modernizes. USA Decom provides CRAC and CRAH removal services in Amarillo for organizations working through a data center closure, a colocation exit, a facility upgrade, or a full building turnover that includes a legacy server room.

Whether the equipment in question is a Vertiv/Liebert DS or CW unit, a STULZ CyberAir system, a Schneider Electric/APC/Uniflair InRow unit, or a Data Aire package, the removal process has to account for refrigerant or chilled-water piping, dedicated electrical circuits, raised-floor or overhead ductwork connections, and often very limited access into the space where the units were originally installed. Getting this wrong can damage floor systems, leave refrigerant improperly handled, or delay a lease turnover or property sale that’s waiting on an empty, clean mechanical and electrical room.

Why Amarillo Facilities Are Retiring CRAC and CRAH Equipment

Amarillo’s economy has long been anchored by energy, agriculture, transportation and manufacturing, drawing on industrial machinery, equipment fabrication, plastics, rail components, building products and specialty metalwork alongside logistics and distribution operations that serve the wider Panhandle region. Many of the companies operating in and around the area maintain their own IT infrastructure, whether that’s a corporate headquarters server room, a regional operations center for a logistics or energy company, a hospital or healthcare system’s data closet, or a small colocation footprint supporting local telecom and internet service providers. As these organizations upgrade to newer, more efficient cooling technology, migrate workloads to cloud or colocation providers, or simply outgrow a legacy server room, the CRAC and CRAH units installed years earlier become obsolete equipment that has to come out before the space can be repurposed.

If you have a project coming up, use the form below to tell our team about the facility, equipment and schedule.

Facility age plays a role too. A precision cooling unit installed for a server room build-out fifteen or twenty years ago is likely to be a legacy Liebert Deluxe, Deluxe 3, Challenger, or early-generation DS unit, and replacement parts and refrigerant for older platforms can become harder to source over time. When that equipment reaches the point where continued operation no longer makes sense, or the space itself is being converted to office, storage or production use, the practical next step is coordinated removal rather than continued upkeep.

What CRAC Removal Actually Involves

Precision cooling removal is a mechanical and electrical disconnection project layered inside whatever else is happening at the facility. Downflow CRAC units typically sit on a raised access floor and discharge conditioned air beneath it, while upflow and ceiling-return configurations tie into overhead ductwork instead. Either way, the unit has to be isolated from its power circuit, disconnected from any control and monitoring wiring tied into a building management system, and separated from its condensate drain before it can be moved.

The refrigerant or chilled-water side of the job depends on the unit type. Direct-expansion (DX) units such as a Liebert PDX/DS with an air-cooled or glycol-cooled condenser, or a STULZ CyberAir DX unit, contain refrigerant that must be recovered before piping is cut. Federal requirements under Section 608 of the Clean Air Act govern refrigerant handling, and technicians performing service, maintenance or repair on DX equipment should use EPA-certified refrigerant recovery equipment rather than intentionally releasing refrigerant to the atmosphere. Chilled-water units, including a Liebert CW/PCW system or an APC/Uniflair chilled-water InRow unit, avoid the refrigerant-handling step but still require the chilled-water supply and return piping to be drained, capped or removed without leaving standing water or damaging the piping distribution serving other equipment that may remain in service.

Once disconnected, the physical cabinet has to come out of the room. A 20-ton or 30-ton perimeter CRAC unit is a substantial piece of equipment, often built in sections or requiring partial disassembly of the cabinet, coil, blower and compressor components to move it through a standard doorway, freight elevator or loading dock. In-row units such as an APC InRow RC/RD or a STULZ CyberRow are lighter individually but are frequently installed in quantity along a row of racks, which turns the project into a repetitive but carefully sequenced removal across the data hall rather than a single large lift.

Planning Around an Active or Partially Occupied Facility

Very few CRAC removal projects happen in a completely empty building. More often, the server room or data hall being decommissioned sits inside a facility that’s still operating, or the removal is happening in phases alongside a migration to new equipment or a new location. That means shutdown sequencing matters. Our team works with facility staff, IT personnel, and the customer’s electrical contractor to confirm which circuits and cooling zones can be taken offline and in what order, so that any equipment or space remaining in production isn’t put at risk during the removal.

Redundancy design also affects sequencing. Many server rooms and small data centers run CRAC units in an N+1 or 2N configuration, meaning some units can be shut down and removed before others while the space continues to be cooled by the remaining capacity. Understanding which units are truly redundant, and which are load-bearing for whatever will keep running through the project, is part of the scope conversation before any disconnection begins.

Access is frequently the harder problem. Server rooms are commonly located on upper floors, in interior spaces without direct loading access, or behind narrow corridors and doorways sized for people rather than mechanical equipment. Rigging a Liebert DS unit or a CyberAir cabinet out of a third-floor office building interior room, through a stairwell or freight elevator, requires the same kind of route planning, protection of finished surfaces, and equipment staging that a much larger industrial rigging job would need, just at a smaller physical scale.

Asset Recovery and Recycling Considerations

Not every retired CRAC unit is scrap. Depending on age, condition, manufacturer and configuration, a removed precision cooling unit may have resale value into the secondary market for smaller data centers, telecom shelters or colocation buildouts that don’t require the latest-generation equipment. Units from established manufacturers such as Vertiv/Liebert, STULZ and Schneider Electric/APC generally hold better resale interest than older or less common platforms, and completeness of the unit, including intact coils, functioning compressors, and available documentation, affects what a unit is worth on the secondary market.

Where resale isn’t realistic, the copper coils, aluminum components, steel cabinet, compressors and electrical components inside a CRAC unit still carry recyclable commodity value. Refrigerant recovered during disconnection is handled separately from the equipment itself in accordance with applicable requirements. As part of scoping a removal project, we evaluate each unit for its most practical disposition path, whether that’s resale, component recycling, or scrap processing, and factor that into the overall project approach. Recoverable value from removed equipment can help offset a portion of removal costs, though it isn’t something we present as a guaranteed credit against project pricing.

Coordinating With Broader Facility Projects

CRAC removal in Amarillo is rarely a standalone request. It typically shows up as one piece of a larger project: a company closing a regional office and clearing the server room as part of a full facility decommissioning, a business relocating IT operations to a new building or a colocation provider and needing the old space returned to the landlord in a specified condition, or a facility converting a legacy data room into usable square footage for another purpose. In each case, the CRAC and CRAH removal has to be sequenced with related work such as rack and cabinet removal, raised-floor demolition, structured cabling removal, and electrical disconnection of PDUs and branch circuits feeding the space.

Lease turnover conditions add another layer. Commercial leases for space that once housed IT infrastructure sometimes specify that mechanical and electrical systems installed by the tenant be removed and the space restored to a defined condition before turnover. Understanding what the landlord expects, and confirming whether that includes patching floor penetrations, removing raised flooring, or restoring ceiling grid where ductwork was run, is worth clarifying early so the removal scope matches what’s actually required for turnover rather than doing either too little or more than necessary.

Case Studies from the Field

Projects our team has handled involving precision cooling removal typically follow a consistent pattern regardless of the exact building or manufacturer involved. A common scenario involves a company consolidating a regional server room into a centralized data center or cloud environment, leaving behind a room full of aging CRAC units, associated PDUs, and a raised access floor that needs to come out before the space is repurposed. On these projects, our team typically starts with a site walk to document unit types, condition, and access constraints, follows with coordinated electrical and mechanical disconnection alongside the customer’s IT and facilities staff, and finishes with rigging and removal of the units along with any racks, cabling and flooring included in the scope.

Another recurring project type involves telecom or utility operations retiring an older switch room or network operations center cooling system as part of a broader facility upgrade. These projects often involve a mix of unit ages and manufacturers accumulated over years of incremental upgrades, which means the removal plan has to account for different refrigerant types, different mounting configurations, and in some cases units that have been out of service long enough that their operating condition is uncertain going into the project.

Serving Amarillo and the Texas Panhandle

USA Decom provides CRAC and CRAH removal services throughout Amarillo and the surrounding Texas Panhandle, including Canyon, Borger, Pampa, Dumas and Hereford, as well as facilities further out along the I-40 and I-27 corridors. Whether the project is a single server room in an office building or multiple precision cooling units spread across a larger operations center, our team can evaluate the scope and put together a removal plan suited to the facility’s schedule and access conditions.

Tell Us About Your Precision Cooling Removal Project

If your Amarillo facility has CRAC or CRAH units that need to come out as part of a closure, consolidation, relocation, or space conversion, use the form below to tell our team about the project. Useful details include the facility type and location, the number and approximate size of the units involved (5-ton, 20-ton, 30-ton or larger), the manufacturer if known, whether the units are DX or chilled-water systems, current operating status, site access conditions, and your target schedule. Photos of the equipment and the surrounding space help us evaluate the project more accurately before we discuss next steps.

Related Posts